Cooling Method: Natural Convection (S) — Self-cooling via external housing surface without auxiliary fans.

Shaft Configuration: Keyed Shaft with Radial Shaft Seal (I) — Features a standard DIN 6885-1 keyway and a single radial lip seal on the drive end for protection against dust and moisture ingress.

Electrical Connection: Rotatable Connector (1) — Equipped with a M23 rotatable plug connector allowing 360° rotation for flexible cable routing.

Pole Configuration: 022 = 2 Pole Pairs (4 Poles) — Designed for high-speed operation with a maximum rated speed up to 6000 rpm.

Frame Size: 230 mm Flange Diameter

Motor Length Code: 23 (Medium Length) — Overall motor length approximately 280 mm (excluding shaft).

Rated Torque: Approximately 10–16 Nm (dependent on winding variant)

Peak Torque: Up to 3× Rated Torque for short-duration overload conditions.

Rated Power: Approximately 3.5–5.5 kW (at rated speed)

Protection Class: IP65 (with shaft seal installed) — Complete protection against dust ingress and protection against low-pressure water jets from all directions.

Insulation Class: Class F (155°C) — Allows for high thermal endurance and extended motor life under continuous duty cycles.

Ambient Temperature Range: -10°C to +40°C (continuous operation); up to +55°C for short-term operation.

Housing Material: Aluminum Alloy Die-Cast Housing (ADC12) — Provides excellent thermal conductivity, lightweight construction, and high mechanical rigidity.

Stator Lamination: Silicon Steel Sheets (0.35 mm thickness) — Low-loss electrical steel for minimized iron losses and high efficiency.

Rotor Construction: Permanent Magnet Rotor with Neodymium (NdFeB) Magnets — High-energy rare-earth magnets for maximum torque per unit volume.

Bearings: Deep Groove Ball Bearings (Drive End) + Deep Groove Ball Bearings (Non-Drive End) — Precision-grade bearings rated for high-speed operation.

Shaft Material: Case-Hardened Steel (C45E / 1.0503) — Induction-hardened surface for superior wear resistance at the keyway and seal contact zones.

Weight: Approximately 28–35 kg (depending on exact configuration)

Moment of Inertia: Approximately 0.015–0.035 kg·m² (dependent on pole/winding variant)

Encoder Compatibility: Optional incremental or absolute encoder mounting on non-drive end (standard IM B5 flange mounting with encoder flange option).

Standards Compliance: EN 60034-1, EN 60034-5, EN 61800-5-1, IEC 60034

Applicable Industries: CNC Machining Centers, Packaging Machinery, Printing Presses, Robotics, Textile Machinery, Material Handling Systems, Plastic Processing Equipment

Key Advantages:

• High torque density due to optimized electromagnetic design
• Low cogging torque for smooth low-speed operation
• Compact design with 230 mm flange for space-constrained installations
• Natural cooling eliminates fan noise and reduces maintenance
• Keyed shaft with seal ensures direct mechanical coupling with environmental protection

Installation Requirements:

• Mount on a rigid, vibration-damped base using B5 flange mounting with 4× M10 mounting holes on 210 mm bolt circle.
• Ensure shaft alignment within 0.05 mm TIR to prevent premature bearing wear.
• Use flexible coupling to accommodate minor misalignment (angular: ≤1°, axial: ≤0.5 mm, radial: ≤0.3 mm).