Free Air Delivery (FAD): 4240 L/min (4.24 m³/min)

Working Pressure: 10 bar (145 psi) — Code 0442

Drive Type: Direct-Driven Screw Element

Cooling Method: Air-Cooled

Oil Classification: 100% Oil-Free (ISO 8573-1 Class 0)

ISO Purity Class: Class 0

Controller: Elektronikon MK5 Touch Controller

Dryer Integration: Yes — Integrated Refrigerated Dryer (I suffix)

Networking Capability: Standard (Version 80 — baseline connectivity)

Rotor Type: Non-contacting rotors with specialized wear-resistant coating

Motor Efficiency Class: IE3

Sound Level: 68 dB(A)

Dimensions (L×W×H): 1850 × 1100 × 1450 mm (approximate)

Weight: ~980 kg (dry)

Structure Features:

• Stainless steel compression chamber
• Integrated air/water aftercooler
• Refrigerant dryer on shared base frame
• Acoustic enclosure with access panels
• Anti-vibration rubber mounts

Working Principle:
Oil-free screw compression with integrated drying. Air enters through intake filter, is compressed by meshing rotors, separated from any residual moisture, then cooled and dried in the integrated refrigerated dryer to +3°C dew point. Load modulation via inlet valve.

Key Features:

• Class 0 oil-free certification
• Integrated dryer — single-point installation
• Elektronikon MK5 with color touchscreen
• Pressure band control for stable output

Advantages:

• Zero oil in output air
• Compact single-skid design
• Up to 35% energy savings via demand-based modulation
• Low total cost of ownership — no oil-related consumables

Applicable Industries:

• Pharmaceutical Production
• Food Processing
• Electronics Manufacturing
• Hospitals & Medical Facilities
• Textile Manufacturing (oil-sensitive processes)

Installation Requirements:

• Indoor, ventilated space
• Ambient: 0°C to +45°C
• Electrical: 400V / 3Ph / 50Hz
• Floor load capacity: ≥1200 kg
• Intake filter mandatory — Atlas Copco Fx recommended
• Condensate drainage line required

Usage Precautions:

• Max working pressure: 10 bar
• Air filter replacement: every 4000 hours
• Dryer ambient limit: +45°C maximum
• Do not bypass safety valves
• Perform quarterly condensate trap inspection