Free Air Delivery (FAD): 4240 L/min (4.24 m³/min)

Working Pressure: 8 bar (116 psi) — Code 0410

Drive Type: Permanent Magnet Variable Speed Drive (VSD+)

Cooling Method: Air-Cooled

Oil Classification: Oil-Injected (ISO 8573-1 Class 1 or better with filtration)

ISO Purity Class: Class 1 (with coalescing filter) / Class 0 achievable with after-treatment

Controller: Elektronikon Touch with GA VSD+ Algorithm

Networking Capability: Yes (N suffix — full Elektronikon Central connectivity)

Motor Type: IE4 Permanent Magnet Synchronous Motor (PMSM)

Motor Efficiency Class: IE4 (Super Premium Efficiency)

Sound Level: 66 dB(A)

Dimensions (L×W×H): 1750 × 1050 × 1400 mm (approximate)

Weight: ~870 kg

Structure Features:

• GA VSD+ air-end with helical rotor profile
• Integrated oil separator with coalescing element
• Aluminum plate-fin aftercooler
• Sound-attenuated enclosure
• IP55-rated electrical components

Working Principle:
Oil-injected screw compression with permanent magnet motor driving the airend at variable speed. The GA VSD+ controller continuously adjusts motor speed (typically 2900–3900 RPM) to match air demand in real time. Oil injects into the compression chamber for sealing, cooling, and lubrication. Oil/air mixture passes through a coalescing separator — oil content in output is <3 ppm.

Key Features:

• VSD+ technology — motor speed adjusts to actual demand, eliminating unloaded waste
• IE4 PMSM motor — highest efficiency class available
• Networked — remote monitoring, alarm notification, energy reporting via Elektronikon Central
• Pressure band control — maintains setpoint within ±0.2 bar
• Smart Air Control — integrates with plant management systems

Advantages:

• Energy savings of 35–50% versus fixed-speed compressors
• Constant pressure output — no pressure fluctuations
• Reduced wear due to soft start/stop — no mechanical unloading
• Full remote diagnostics and predictive maintenance alerts

Applicable Industries:

• General Manufacturing
• Automotive Assembly
• Metal Fabrication
• Plastics & Rubber Processing
• Woodworking
• Printing & Packaging

Installation Requirements:

• Indoor installation, well-ventilated
• Ambient: 0°C to +45°C
• Electrical: 400V / 3Ph / 50Hz (3-wire + PE)
• Floor load: ≥1000 kg
• Intake filter mandatory — Atlas Copco Fx series
• Minimum clearance: 0.8 m intake, 0.6 m discharge
• Condensate drain connection

Usage Precautions:

• Max working pressure: 8 bar
• Oil filter replacement: every 4000 hours or per oil analysis
• Air filter: every 4000 hours
• Oil separator: every 8000 hours
• Monitor oil pressure and temperature via controller — shutdown if oil temp exceeds 95°C
• Do not operate with blocked intake filter