Digital guide
You are here:
Atlas Copco TC52P-D-DECTLM
Product Series: TC Series — Electric-Driven Portable Compressors (Full-Feature Premium Variant)
Product Introduction:
The TC52P-D-DECTLM combines three premium features in one unit: Decoupled (D) vibration mounting, Digitally Enhanced Control (DEC), and Tool Life Management (TLM). This is the most feature-complete electric variant in the TC52P line, targeting rental companies and contractors requiring maximum uptime, lowest vibration, and full tool management.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Free Air Delivery (FAD) | 520 cfm (14.7 m³/min) |
| Working Pressure | 145 psi (10 bar) |
| Motor Type | 400V / 3-Phase / 50 Hz / IE3 Premium Efficiency |
| Motor Power | 160 hp (119 kW) |
| Controller | Elektronikon Mark V with DEC + TLM |
| Mounting System | Decoupled (D) — Rubber Vibration Isolators |
| Fuel Tank Capacity | 80 gal (303 L) |
| Operating Weight | 13,200 lbs (5,987 kg) |
| Dimensions (L×W×H) | 185 × 71 × 77 in (4,700 × 1,800 × 1,950 mm) |
| Noise Level (at 7 m) | 76 dB(A) |
| Vibration Level | < 2.5 mm/s RMS (decoupled) |
Material Composition:
- Frame: High-tensile steel with powder-coat finish
- Vibration Isolators: Neoprene rubber mounts, oil-resistant, rated for 16,000 lbs
- Air End: GHH cast iron with ceramic-coated rotors
- Cooler: Aluminum brazed plate heat exchanger
- Controller: IP65 polycarbonate housing
Structural Features:
- Decoupled (D) mounting: four neoprene rubber isolators between compressor and trailer
- DEC flow sensor mounted at main discharge
- TLM smart couplers at all tool outlets
- Full canopy with integrated forklift pockets and lifting eyes
- Elektronikon Mark V 7-inch color touchscreen
Working Principle:
The IE3 electric motor drives the air end through a flexible coupling. The DEC system modulates motor speed in real time based on measured airflow demand, maintaining discharge pressure within a 2 psi band. The TLM module identifies each connected tool via smart couplers, logs cumulative runtime and air volume, and triggers maintenance alerts. The decoupled mounting system absorbs 80% of mechanical vibration, protecting both the machine and the trailer structure. The Elektronikon controller integrates all three subsystems into a unified management interface.
Key Advantages:
- Triple-feature integration: vibration isolation + energy optimization + tool management
- Vibration < 2.5 mm/s RMS — protects sensitive equipment and trailer structure
- DEC saves up to 35% energy; TLM extends tool life by 20–30%
- Ideal for long-term rental where uptime and tool cost control are critical
Applicable Industries:
Equipment rental, large-scale construction, infrastructure, tunneling, shipbuilding, industrial maintenance
Installation Requirements:
- 400V 3-phase supply, minimum 200A, grounding ≤ 5 ohms
- Verify all four decoupled mounts are installed and torque-checked to 120 Nm
- TLM smart couplers required for tool management functionality
- Level surface, 3 ft (1 m) clearance all sides
Usage Notes:
- Inspect neoprene vibration mounts every 250 hours; replace if cracked or compressed beyond 15%
- DEC sensor must be recalibrated after any air-end disassembly
- TLM coupler batteries last 2 years; replace per Atlas Copco schedule
- Do not tow with decoupled mounts unlocked — engage transport lock pins
