Digital guide
You are here:
Atlas Copco PF6000IF
Product Name: Atlas Copco PF6000IF Portable Diesel Air Compressor
Product Overview: The PF6000IF is the largest-capacity unit in the P-series, configured as an Indoor Friendly (IF) variant. The IF designation indicates optimized exhaust aftertreatment enabling operation in enclosed or semi-enclosed spaces such as tunnels, buildings, and underground mines. Delivers 6000 cfm at full capacity with significantly reduced emissions.
Detailed content
Model Series: P-Series (PF Series) Portable Compressors
Technology Type: Diesel-driven rotary screw air end with aftertreatment system
Free Air Delivery (FAD): 6000 cfm (170 m³/min)
Working Pressure Range: 7 – 13 bar (100 – 185 psi)
Engine: Diesel engine with DOC (Diesel Oxidation Catalyst) and/or DPF (Diesel Particulate Filter) aftertreatment
Fuel Tank Capacity: Approximately 500 – 600 liters
Cooling System: Water-cooled with heat exchanger
Noise Level: Approximately 96 dB(A) at 7 meters (open frame); enclosure variants reduce to 72–75 dB(A)
Emissions: Meets Stage IIIB / Tier 4 Final equivalent standards; CO and particulate levels reduced for indoor use
Dimensions (L × W × H): Approximately 5800 × 2200 × 2500 mm
Weight: Approximately 8500 – 9500 kg (operating weight)
Structure: Trailer-mounted chassis with integrated aftertreatment exhaust system
Air Receiver Volume: Approximately 1000 – 1500 liters
Drive System: Direct diesel-to-screw drive
Control System: Electronic controller with emission monitoring and alarm
Key Features:
- IF (Indoor Friendly) certification allows operation in enclosed spaces
- Aftertreatment system reduces CO, NOx, and particulate matter
- Full 6000 cfm capacity maintained even with aftertreatment installed
- Suitable for tunnel boring, underground mining, and indoor construction
- Remote monitoring capability via telematics
Advantages:
- Only 6000 cfm unit rated for indoor operation
- Eliminates need for expensive fresh-air ducting in tunnels
- Full power delivery without emission-related derating
- Compliant with strict occupational health and safety standards
Applicable Industries: Tunnel boring, underground mining, indoor demolition, building construction in enclosed spaces, shipyard work
Installation Requirements: Mandatory exhaust ducting to fresh air source for indoor use; continuous CO monitoring required in enclosed spaces; level pad; adequate ventilation verification before startup
Usage Notes: Never operate IF unit in fully enclosed space without exhaust extraction; monitor DPF regeneration cycles; aftertreatment system requires specific low-sulfur diesel fuel; record emission readings per regulatory requirement
