Nominal Flow Rate: 4,000 L/min (4.0 m³/min) at 7 bar inlet pressure

Maximum Operating Pressure: 16 bar (232 psi)

Maximum Operating Temperature: +50 °C (+122 °F)

Connection Type: G 1″ (BSP thread) — designation “C”

Drain Type: Manual drain valve with hand wheel — designation “HW”

Housing Material: Anodized aluminum alloy (AlSi10Mg)

Filter Element Material: Sintered bronze / sintered metal

Differential Pressure Indicator: Not equipped (standard)

Pressure Gauge: Not equipped (standard)

Dimensions (Approximate): Length 310 mm × Diameter 138 mm

Weight (Approximate): 3.8 kg

Function: Removes solid particles, oil aerosols, and water droplets from compressed air lines downstream of the compressor aftercooler

Applicable Industries: General manufacturing, food and beverage, automotive, electronics, pharmaceutical, textile

Installation Requirement: Install vertically with drain valve at the bottom; ensure minimum 300 mm clearance above for element replacement

Notes: Manual drain requires periodic operator activation; no electronic control interface