Nominal Flow Rate: 4,000 L/min (4.0 m³/min) at 7 bar inlet pressure

Maximum Operating Pressure: 16 bar (232 psi)

Maximum Operating Temperature: +50 °C (+122 °F)

Connection Type: G 1″ (BSP thread) — designation “C”

Drain Type: Manual drain valve with hand wheel — designation “HW”

Housing Material: Anodized aluminum alloy (AlSi10Mg)

Filter Element Material: Sintered bronze / sintered metal

Differential Pressure Indicator: Equipped — designation “DN” — single differential pressure indicator

Pressure Gauge: Not equipped (standard)

Dimensions (Approximate): Length 310 mm × Diameter 138 mm

Weight (Approximate): 4.0 kg

Function: Standard PF4002 filtration with differential pressure indicator for monitoring filter element condition without requiring external instruments

Applicable Industries: General manufacturing, automotive, food and beverage, electronics, pharmaceutical (pre-filtration stage)

Installation Requirement: Install vertically; DN indicator must remain visible; drain valve at lowest point; ensure 300 mm clearance above for element service

Advantage over PF4002-C-HW: Added DN indicator enables condition-based maintenance instead of time-based replacement; reduces unplanned downtime and element waste