Nominal Flow Rate: 1,050 L/min (1.05 m³/min) at 7 bar inlet pressure

Maximum Operating Pressure: 16 bar (232 psi)

Maximum Operating Temperature: +50 °C (+122 °F)

Connection Type: G 1″ (BSP thread) — designation “C” (implied)

Drain Type: Electronic interval purge drain (EIP) — automated condensate discharge

Housing Material: Anodized aluminum alloy (AlSi10Mg)

Filter Element Material: Sintered bronze / sintered metal

Differential Pressure Indicator: Not equipped (standard)

Pressure Gauge: Equipped — designation “G” — analog pressure gauge, range 0–16 bar

Electronic Drain Specification: 230 V AC / 24 V DC; programmable purge interval; failsafe open on power failure

Dimensions (Approximate): Length 285 mm × Diameter 115 mm

Weight (Approximate): 3.8 kg (including EIP module and gauge)

Function: Particle filtration with real-time system pressure readout and fully automated condensate removal; ideal for unattended operation

Applicable Industries: Remote compressor rooms; facilities with 24/7 operation; locations with limited maintenance staff; food and beverage plants

Installation Requirement: Install vertically; ensure electrical supply to EIP; pressure gauge must face upward; maintain 100 mm clearance around EIP for heat dissipation

Advantage: Combines pressure monitoring with zero-maintenance drain operation; eliminates air loss from manual blow-down; reduces total cost of ownership