Nominal Flow Rate: 1,050 L/min (1.05 m³/min) at 7 bar inlet pressure

Maximum Operating Pressure: 16 bar (232 psi)

Maximum Operating Temperature: +50 °C (+122 °F)

Connection Type: G 1″ (BSP thread) — designation “C”

Drain Type: Manual drain valve with hand wheel — designation “HW”

Housing Material: Anodized aluminum alloy (AlSi10Mg)

Filter Element Material: Sintered bronze / sintered metal

Differential Pressure Indicator: Equipped — dual indicators (IB2) — two independent color indicators for monitoring two filter stages or inlet/outlet comparison

Pressure Gauge: Not equipped (standard)

Dimensions (Approximate): Length 285 mm × Diameter 115 mm

Weight (Approximate): 3.5 kg

Function: Provides dual-point differential pressure monitoring; allows comparison between filter inlet and outlet or between two filter elements in series; enables precise determination of filter loading

Applicable Industries: Critical process air; pharmaceutical pre-filtration; electronics; any application requiring verified filter performance

Installation Requirement: Install vertically; both IB2 indicators must face the operator for simultaneous reading; drain valve at bottom

Notes: IB2 indicators activate at 0.5 bar differential each; dual reading allows immediate identification of which stage requires service