Rated voltage is 120 VAC. Power level is 800 W. Frame size is 5.7 inches, equivalent to 145 mm. Stage count is three. Maximum flow is approximately 82.5 SCFM, equal to 140.2 m³/h. Maximum pressure is approximately 127.3 inH₂O, equal to 31.7 kPa. Inlet tube diameter is 1.25 inches. Electrical connection uses a 5-cavity post header with power leads and 0 to 10 VDC speed command leads.

Speed control accepts 0 to 10 VDC command. Closed-loop regulation maintains set speed under load change. Brushless motor construction supports long service intervals. The blower includes mating connector assemblies for installation.

Use the blower for medical and dental air systems, laboratory air sampling, fume evacuation, material handling, and business-machine or packaging ventilation where controlled pressure and flow are required.

The housing uses industrial blower-grade plastic and metal hardware. The motor uses brushless DC internals with encapsulated controller electronics. Supplied connector kits provide power and control termination.

AC input is converted by the internal controller to drive the brushless motor. The impeller generates airflow through the bypass stage path. The controller adjusts motor speed from the 0 to 10 VDC command and feedback to maintain target flow or pressure.

Mount the blower on a stable bracket or equipment frame with clear inlet and discharge paths. Use the specified 1.25 inch inlet connection. Separate power and 0 to 10 VDC control wiring to reduce electrical noise. Verify cooling air around the motor and controller.

Do not block the inlet or discharge. Confirm the 0 to 10 VDC command source before energizing. Avoid sustained operation beyond rated pressure and flow. Inspect connectors and seals during preventive maintenance.