Technical Specifications:

• Communication Protocols: Profibus DP (Master), DeviceNet (Master), Modbus Plus (Master)
• Supported Baud Rates: 9.6 kbps to 12 Mbps (Profibus DP), 125 kbps / 250 kbps / 500 kbps (DeviceNet)
• Number of Fieldbus Segments: 1 primary segment per module
• Maximum Node Count: Up to 126 nodes per segment (Profibus DP)
• Module Dimensions: Standard Quantum bus module format
• Power Consumption: 2.5 W typical at 5V DC bus power
• Operating Temperature Range: 0°C to +60°C (0°C to +55°C for extended)
• Storage Temperature Range: -25°C to +70°C
• Relative Humidity: 5% to 95% non-condensing
• Mounting: DIN rail or backplane (Quantum chassis)
• Weight: Approximately 80 g

Functional Features:

• Acts as Master station on Profibus DP and DeviceNet networks
• Supports cyclic and acyclic data exchange with field devices
• Provides GSD file management for device configuration
• Enables isochronous mode for motion control applications
• Supports DPV1 class 1 and class 2 operation
• Integrates with Unity Pro / EcoStruxure Control Expert for configuration

Performance Parameters:

• Cyclic Data Exchange Time: 1 ms to 100 ms configurable
• Input/Output Data Length: Up to 244 bytes input / 244 bytes output per module (Profibus DP)
• Diagnostic Capability: Full bus diagnostic, station diagnostic, module diagnostic
• Redundancy Support: Compatible with Quantum redundant configuration

Material Composition:

• Housing: FR-4 epoxy glass fiber printed circuit board with conformal coating
• Connectors: Gold-plated contact pins, high-reliability connector system
• Enclosure: UL94 V-0 rated flame-retardant plastic

Structural Features:

• Compact single-width Quantum module format
• Front-facing status LEDs (Power, Run, Fault, Bus Activity)
• Backplane connector with keyed alignment for error-proof insertion
• Terminal block or plug-in connector for fieldbus wiring

Working Principle:
The MM-FMC3-010 module operates as an intelligent communication co-processor. It connects to the Quantum PLC backplane via the system bus, receiving process data from the CPU. The module independently manages all Fieldbus protocol stack operations — including token passing, telegram framing, CRC checking, and device addressing — and exchanges cyclic process data with connected Fieldbus slaves at configured intervals. Acyclic data requests are handled on demand by the CPU via the module’s shared memory interface.

Advantages & Highlights:

• Dedicated Communication Processing: Frees CPU resources for application logic
• Multi-Protocol Support: Profibus DP, DeviceNet, Modbus Plus from a single module slot
• High Node Capacity: Supports up to 126 devices per segment
• Deterministic Performance: Guaranteed cyclic exchange times
• Easy Configuration: Fully integrated in Unity Pro environment

Applicable Industries:

• Manufacturing and assembly lines
• Process automation (chemical, pharmaceutical, food & beverage)
• Water and wastewater treatment
• Oil and gas upstream/midstream
• Power generation and distribution
• Automotive production

Installation Requirements:

• Mount in Quantum PLC chassis (e.g., Quantum 65-786-0100 or compatible)
• Ensure proper bus terminator placement (120 Ω at each end of Profibus segment)
• Use shielded twisted-pair cable (Type A for Profibus DP)
• Maximum segment length: 1200 m at 1.5 Mbps (Profibus DP)
• Ground shield at one end only to prevent ground loops

Usage Precautions:

• Do not exceed maximum node count per segment
• Observe correct polarity on 24V DC bus power supply
• Replace bus terminators when adding/removing modules
• Perform GSD file updates only through authorized software tools
• Maintain minimum 10 cm spacing between modules for adequate ventilation