Digital guide
You are here:
AEG MA-P884-001
Product Category: Vacuum Cleaner Exhaust / Motor Protection Filter
Product Introduction:
The AEG MA-P884-001 is a motor protection exhaust filter installed at the vacuum cleaner’s air outlet. It captures fine dust particles before they exit the machine, protecting the motor from abrasive particle damage and ensuring clean exhaust air is released into the environment.
Detailed content
Technical Specifications:
- Filter Type: Foam motor protection filter
- Dimensions: Approximately 110 x 80 x 20 mm
- Filtration Grade: Coarse pre-filter (motor protection class)
- Material: Polyurethane foam with open-cell structure
- Compatibility: AEG Vampyr, AEG Super 2000, AEG Electronic series
- Replacement Interval: Every 3–6 months or when visibly soiled
- Quantity per Pack: 1 piece
Structural Features:
- Rectangular block shape with beveled edges for precise housing fit
- Open-cell foam matrix allowing airflow while trapping particles larger than 10 micrometers
- Washable and reusable construction
- Color-coded edge for easy identification during replacement
Material Composition:
- Primary Material: Polyurethane (PU) open-cell foam
- Density: Approximately 30 kg/m³
- Color: Black
Working Principle:
Exhaust air carrying fine dust exits the motor compartment and passes through the PU foam filter. The open-cell structure traps dust particles on the foam surface and within the cell walls via mechanical interception. Clean air exits the filter and is released into the room. The filter acts as the final barrier protecting the motor windings from particulate abrasion.
Key Advantages:
- Extends motor lifespan by preventing fine dust ingress into motor bearings and windings
- Washable and reusable — reduces long-term cost compared to disposable filters
- Precise fit in AEG vacuum housings with no air leakage
- Maintains suction performance by preventing motor contamination
Applicable Industries / Use Cases:
- Residential vacuum cleaner maintenance
- Professional cleaning service equipment servicing
Installation Requirements:
- Turn off and unplug the vacuum cleaner before replacement
- Remove the old filter from the motor exhaust housing
- Insert the new MA-P884-001 filter into the housing slot, ensuring full seat contact
- Close the filter cover and secure with clips or screws as per model
Usage Notes:
- Wash with warm water (max 40°C) and mild detergent every 4–6 weeks
- Allow to air dry completely for 24 hours before reinstalling
- Do not wring, twist, or use a dryer — this destroys the open-cell structure
- Replace the filter entirely if foam becomes compressed, torn, or discolored
