Digital guide
You are here:
AEG ASP890300 Remote I/O Processor Module
- Product Introduction: This is a remote I/O processor module of the AEG 800 series. It is used to manage the communication between the main controller and the remote I/O rack, enabling the controller to access and control the I/O modules in the remote rack, which is suitable for distributed control systems.
- Technical Specifications:
- Power Supply: Selectable 115/230 VAC or 24 VDC, power consumption of 10 W.
- Communication Medium: Coaxial cable (75 ohms), Communication Rate: 1.544 MHz.
- I/O Scanning Speed: Less than 5 ms for 256 I/O points.
- Number of Remote I/O Racks: Up to 32 racks can be connected.
- Power Output: +5.0 VDC (10 A), +4.3 VDC (5 A), -5.0 VDC (2 A), for powering remote I/O modules.
- Operating Temperature: 0°C to +60°C, Protection Rating: IP20.
Detailed content
- Functional Features:
- It adopts a dual – channel communication design, supporting main – standby communication lines to improve system reliability and anti – interference ability.
- It has a built – in self – diagnosis function, which can monitor the communication status and power supply status in real time and send fault alarms.
- It supports hot – swapping of I/O modules, allowing the replacement of modules without powering off the system.
- It can automatically detect the type and address of the connected I/O modules, simplifying the configuration process.
- It has a data buffering function to prevent data loss when the communication is temporarily interrupted.
- Application Scenarios: It is used in distributed control systems such as large – scale chemical plants, automobile assembly lines, and water treatment plants, connecting the main controller with remote I/O racks distributed in different locations to achieve centralized control and decentralized data acquisition.
