Digital guide
You are here:
AEG AS-P810-000
Product Introduction:
The AEG AS-P810-000 is a universal floor nozzle designed for AEG Vampyr series vacuum cleaners and compatible Electrolux models. It serves as the primary ground-contact cleaning attachment for carpet and hard floor surfaces. The nozzle features a wide cleaning path with integrated brush rotation for deep carpet fiber agitation.
Detailed content
Technical Specifications:
- Cleaning Width: 320 mm (12.6 inches)
- Connection Type: 32 mm push-fit / friction-lock tube connection
- Brush Type: Rotating bristled brush roll with nylon and natural bristle blend
- Suitable Floor Types: Carpet, hard floor, parquet, tile, laminate
- Weight: Approximately 450 g
- Color: Dark grey / anthracite
Structural Features:
- Low-profile housing design enabling cleaning under furniture down to 8 cm clearance
- Swivel neck joint allowing 180-degree steering angle
- Transparent dust inspection window on nozzle base
- Rubber bumper guard protecting furniture and walls during operation
- Ergonomic click-on attachment mechanism with audible locking confirmation
Material Composition:
- Housing: ABS plastic (Acrylonitrile Butadiene Styrene)
- Brush Bristles: Nylon 6.6 synthetic fiber with natural horsehair blend
- Wheels: TPE (Thermoplastic Elastomer) soft-roll wheels
- Seals: Silicone rubber gasket at connection point
Working Principle:
The nozzle connects to the vacuum hose via the 32 mm friction-lock system. Airflow from the vacuum motor creates suction through the nozzle opening. The rotating brush roll, driven by airflow turbulence, agitates carpet fibers to dislodge embedded dirt and dust particles, which are then drawn into the suction stream and transported to the dust bag or container.
Key Advantages:
- Wide 320 mm cleaning path reduces cleaning time by up to 30% compared to standard nozzles
- Low-profile design reaches under sofas, beds, and cabinets
- Dual-bristle system combines nylon durability with natural bristle gentle-floor care
- Universal 32 mm compatibility across AEG Vampyr and Electrolux ZE/ZB/ZC series
Applicable Industries / Use Cases:
- Residential household cleaning
- Hotel and hospitality room service
- Office and commercial facility maintenance
Installation Requirements:
- Compatible with all AEG Vampyr series vacuums with 32 mm wand diameter
- Align the connection tube and push firmly until an audible click is heard
- Ensure brush roll rotates freely before first use
Usage Notes:
- Remove tangled hair and thread from brush roll after each use
- Replace brush roll every 6–12 months under normal household use
- Do not use on wet surfaces — this is a dry-cleaning nozzle only
