Connection Height: 185 mm (distance between top of bottom unit and bottom of top unit)

Material Composition:

• Bracket: Cold-rolled Steel, 1.5 mm thickness
• Finish: White Powder Coating (RAL 9010)
• Pads: EPDM Rubber, self-adhesive backing
• Hardware: Stainless Steel (AISI 304), M5 × 16 mm screws with washers

Dimensions:

• Width: 600 mm
• Depth: 600 mm
• Connection Height: 185 mm

Load Capacity: 35 kg maximum on top unit

Function: Elevates the top appliance (dryer) by 185 mm above the bottom appliance (washer), providing clearance for control panel access and improved ergonomics. Includes anti-vibration pads.

Working Principle: Bracket mounts to the top rear of the bottom unit and the bottom rear of the top unit. EPDM pads sit between bracket and appliance feet, absorbing vibration.

Installation Requirements:

• Align both units to exactly 600 mm width
• Secure with 4 × M5 screws per side (8 total)
• Torque: 4 Nm
• Ensure top unit is level and plumb
• Electrical connections: each unit plugs into its own dedicated outlet — do not daisy-chain

Usage Notes:

• Use this kit when the 185 mm height gap is required (e.g., for counter-height alignment or specific installation constraints)
• Compare with AS-MBKT-085 (85 mm) for lower stacking height
• Do not use with appliances narrower than 595 mm