Connection Height: 85 mm (low-profile stacking)

Material Composition:

• Bracket: Cold-rolled Steel, 1.5 mm thickness
• Finish: White Powder Coating (RAL 9010)
• Pads: EPDM Rubber, 3 mm thick, pre-cut to fit
• Hardware: Stainless Steel (AISI 304), M5 × 14 mm screws with nylon lock nuts

Dimensions:

• Width: 600 mm
• Depth: 600 mm
• Connection Height: 85 mm

Load Capacity: 35 kg maximum on top unit

Function: Provides a low-profile connection (85 mm gap) between washer and dryer, ideal for installations where ceiling height is limited or a compact stack is preferred. Includes vibration-dampening pads.

Working Principle: Identical to AS-MBKT-185 but with reduced spacing. Bracket bolts to rear of both units. EPDM pads decouple vibration between stacked appliances.

Installation Requirements:

• Both units must be 60 cm wide freestanding models
• Mount bracket to bottom unit first, place top unit, then secure top-side screws
• Torque all fasteners to 4 Nm
• Verify 85 mm gap is maintained evenly across all four corners (tolerance ±2 mm)
• Each appliance requires independent electrical supply

Usage Notes:

• Select AS-MBKT-085 for tight-space installations (e.g., under counter, in closet)
• Select AS-MBKT-185 when more clearance is needed for hose connections or control panel access
• Do not interchange with non-AEG stacking kits — mounting hole pattern is AEG-proprietary
• Maximum total stack weight: 110 kg