Technical Specifications:

• Cooling Capacity: 3.5 kW (12,000 BTU/h)
• Heating Capacity: 4.0 kW (13,600 BTU/h)
• Energy Efficiency Ratio (EER): 3.45 (A++ rating)
• Seasonal COP (SCOP): 4.65
• Power Input (Cooling): 1015W (rated) / 280–1500W (variable inverter)
• Power Input (Heating): 980W (rated) / 260–1450W (variable inverter)
• Airflow Rate: 620 m³/h (high) / 420 m³/h (medium) / 280 m³/h (low)
• Noise Level (Indoor): 22 dB(A) (silent mode) / 38 dB(A) (max)
• Refrigerant: R32 (GWP 675)
• Voltage: 220–240V / 50Hz / 1-phase
• Dimensions (W×H×D): 898 × 299 × 215 mm
• Net Weight: 11.5 kg

Material Composition:

• Front Panel: ABS engineering plastic, UV-stabilized, matte white finish
• Heat Exchanger: Copper tube with aluminum fin (hydrophilic coating)
• Fan Blade: AS resin, 5-blade design, dynamically balanced
• Drain Tray: Anti-bacterial treated polypropylene
• Filters: Washable electrostatic dust filter + activated carbon deodorizing filter

Structural Features:

• Slim 215mm depth design for wall-proximity installation
• Horizontal automatic louver with 7-segment swing (up/down) + vertical swing (left/right)
• Hidden LED display on front panel (shows temperature when active, invisible when off)
• Quick-release front panel for filter access (no tools required)
• R410A/R32 compatible with pre-charged connection pipes up to 5m

Key Functions:

• DC Inverter Compressor: Variable speed operation from 30% to 100% capacity
• Ionizer Function: Releases negative ions for air purification
• Turbo Mode: Reaches target temperature 40% faster
• Sleep Mode: Gradually adjusts temperature ±0.5°C over 8 hours for optimal sleep comfort
• Timer Function: 24-hour on/off programmable timer
• Self-Clean: Evaporator dry-out function prevents mold growth
• WiFi Ready: Compatible with AEG SmartHome app (module sold separately)

Advantages:

• Ultra-quiet operation at 22 dB(A) in silent mode — among the lowest in class
• R32 refrigerant offers 68% lower GWP than R410A
• Inverter technology reduces energy consumption by up to 40% versus fixed-speed units
• Self-clean function eliminates manual evaporator cleaning

Applicable Industries: Residential bedrooms, living rooms, small offices, boutique retail spaces

Installation Requirements:

• Wall must support minimum 25kg load
• Standard 65mm diameter wall penetration for pipe routing
• Electrical: dedicated 16A circuit with earth leakage protection (30mA RCD)
• Condensate drain must have minimum 1% slope toward drain point
• Refrigerant piping: flare-nut connection, nitrogen pressure-tested to 4.0 MPa before charging

Usage Precautions:

• Clean washable filters every 2 weeks during heavy use
• Professional cleaning of heat exchanger recommended annually
• Do not block air intake or outlet — minimum 15cm clearance on all sides
• Use only R32 refrigerant — do not mix with other refrigerant types