Digital guide
You are here:
AEG AS-BDEP-218 Electronic Display & Control Board
Model Number: AS-BDEP-218
Product Introduction:
The AS-BDEP-218 is an electronic display and control printed circuit board (PCB) manufactured by AEG Electrolux for use in built-in ovens and cooktop appliances. It manages the user interface, temperature regulation signals, and program execution.
Detailed content
Technical Specifications:
- Board Type: Digital Display Control PCB
- Input Voltage: 220–240V AC / 50Hz
- Control Voltage (Logic): 3.3V / 5V DC
- Communication Protocol: I²C / SPI Bus Interface
- Connector Type: Multi-Pin Locking Connector (AEG Proprietary)
- Operating Temperature Range: -10°C to +85°C
- Board Dimensions: Approximately 180 mm x 120 mm
Functions:
- LED/LCD Segment Display Drive
- Touch Keypad Scanning & Input Processing
- Timer & Clock Management
- Temperature Setpoint Transmission to Main Controller
- Door Open/Close Detection Signal Processing
Material Composition:
- Substrate: FR-4 Glass Epoxy (TG170)
- Trace Material: Copper (1 oz / 35μm)
- Surface Finish: HASL (Lead-Free) / ENIG
- Solder Mask: Green Lipid-Based Solder Resist
Applicable Models: AEG Built-In Ovens (Mastery & Competence Series)
Usage Precautions:
- Handle with ESD protection (wrist strap required)
- Do not expose to moisture during installation
- Verify connector pin alignment before insertion
