AEG ALU130
Product Name: AEG ALU130 Washing Machine (or Laundry Appliance)
Product Category: Front-Loading Washing Machine
Product Introduction: The AEG ALU130 is a front-loading washing machine from AEG’s laundry range, featuring AEG’s ProSteam technology and ÖKOMix system for optimized detergent dissolution and fabric care.
Detailed content
Model Series: ALU Series (AEG Laundry)
Type: Front-Loading Washing Machine
Load Capacity: 8 kg (cotton program)
Maximum Spin Speed: 1300 RPM
Energy Efficiency Class: A+++ (EU Energy Label 2021)
Annual Energy Consumption: 150 kWh/year (based on 220 standard cycles)
Water Consumption per Cycle: 49 liters (standard 60°C cotton cycle)
Noise Level (Washing): 51 dB(A)
Noise Level (Spinning): 76 dB(A)
Dimensions (W x H x D): 596 mm x 847 mm x 636 mm
Net Weight: 72 kg
Power Supply: 220-240V / 50Hz / 1-phase
Rated Power: 2,200 W (max, during heating)
Program Count: 14 preset programs + 3 custom programs
Program Options:
- Cotton 60°C
- Cotton 40°C
- Synthetics
- Delicates / Silk
- Wool / Hand Wash
- Rapid 20′
- Mixed Load
- Dark Wash
- Drum Clean
- Rinse + Spin
- Eco 40-60
- Outdoor
- Anti-Allergy
- Steam Refresh
Key Technologies:
- ÖKOMix: Pre-mixes detergent with water before contacting clothes for even distribution
- ProSteam: Steam injection at end of cycle to reduce wrinkles by up to 50%
- ProSense: Automatic load weight sensing to adjust water and energy usage
- SoftWater System: Built-in water softener to protect fabrics and machine
- TimeManager: Adjustable cycle time (20%–100% of standard duration)
Structure Features:
- Front-loading door with Ø 340 mm opening
- Stainless steel drum (480 mm diameter)
- Anti-vibration side panels for reduced noise
- LCD display with remaining time indicator
- Child lock function
- Foam detection system
- Unbalance control system
Material Composition:
- Drum: Stainless steel
- Door: Tempered glass + ABS frame
- Counterweight: Concrete (vibration dampening)
- Outer casing: Galvanized steel with powder coating
Installation Requirements:
- Level floor with 10 cm clearance behind for hose connections
- Water supply: Ø 15 mm cold water, pressure 0.5–10 bar
- Drain: Ø 22 mm standpipe or Ø 40 mm hose drain
- Dedicated 10A circuit with earth connection
- Transport bolts must be removed before first use (4 bolts at rear)
.jpg)











