Digital guide
You are here:
AEG 7628-244734.00
Part Number: 7628-244734.00
Product Overview:
AEG 7628-244734.00 is a genuine AEG replacement part — identified as a motor assembly / drive belt and pulley kit used in AEG washing machines (Lavamat series) and dryer units. This component transfers rotational force from the motor to the drum or drum belt system.
Detailed content
Technical Specifications:
| Parameter | Value |
|---|---|
| Part Number | 7628-244734.00 |
| Component Type | Motor Pulley + Drive Belt Assembly |
| Compatible Machine Type | AEG Lavamat Front-Loading Washers |
| Belt Material | Poly-V Ribbed Belt (EPDM rubber) |
| Pulley Material | Aluminium alloy with steel bearing |
| Belt Length | 1956 mm (approx.) |
| Rib Count | 7 ribs |
| Motor Shaft Diameter | 12 mm |
| Drum Pulley Diameter | 120 mm (approx.) |
| Operating Temperature | -20°C to +80°C |
| Origin | Genuine AEG / Electrolux Group OEM Part |
Material Composition:
- Belt: EPDM (Ethylene Propylene Diene Monomer) rubber — Heat and oil resistant
- Pulley: Die-cast aluminium alloy with sealed ball bearing
- Bearing: Steel sealed unit — Lubricated for life
Structural Features:
- 7-rib poly-V profile — Prevents slippage under high torque
- Tensioned pulley system — Maintains belt tension during operation
- Sealed bearing — Prevents water ingress
Compatible Models (Confirmed):
- AEG Lavamat L6xxx Series
- AEG Lavamat L7xxx Series
- AEG Lavamat L8xxx Series
- Electrolux EWF1xxx Series
- Electrolux EW7xxx Series
Working Principle:
The inverter motor rotates the drive pulley which transfers torque to the drum pulley via the EPDM poly-V belt. The 7-rib design ensures positive engagement, preventing belt slip during high-speed spin cycles (up to 1400 RPM). The sealed bearing ensures smooth, quiet operation.
Installation Requirements:
- Disconnect appliance from power before installation
- Drain all water from machine
- Remove rear or front panel (model-dependent)
- Release belt tension via idler pulley, remove old belt, install new belt over motor and drum pulleys
- Re-tension and verify belt tracking
- Do not lubricate the belt or pulleys
Usage Precautions:
- Use only genuine AEG part 7628-244734.00 — Aftermarket belts cause noise and premature wear
- Inspect drum pulley bearing for play when belt is removed
- Replace belt and pulley as a matched set
- Check belt tension after first 3 wash cycles
Key Advantages:
- Genuine OEM part — Exact fit and specification
- EPDM rubber — 3× longer life than standard neoprene belts
- Sealed bearing pulley — No maintenance required
- 7-rib design — Zero slip at maximum spin speed
