Digital guide
You are here:
AEG 6051-042.23966 Industrial Grade Pressure Transmitter
- Product Introduction: This is a high-precision industrial grade pressure transmitter of AEG, with a measured pressure range of 0-10 bar and a standard 4-20 mA current output signal, specially designed for the on-line measurement of gauge pressure of gas, liquid and steam media in industrial process control systems. It adopts a diffused silicon pressure sensor core, stainless steel measuring diaphragm and digital temperature compensation technology, with high measurement accuracy, good stability and strong anti-interference performance, and is a core sensing component for the pressure parameter detection of industrial process control systems.
- Technical Specifications:
- Measured Medium: Clean gas, liquid, steam (≤150°C), non-corrosive and non-crystallizing medium.
- Measuring Range: 0-10 bar (gauge pressure), optional range 0-1 bar to 0-100 bar (customizable).
- Output Signal: 4-20 mA DC two-wire system, load resistance 0-750 Ω (24 VDC power supply).
- Measurement Accuracy: ±0.1% of full scale (FS) at 25°C, ±0.2% FS over -10°C to +80°C.
- Zero/Span Adjustment: Digital adjustment (via HART protocol), no mechanical adjustment, high precision.
- Temperature Compensation: -10°C to +80°C, digital temperature compensation technology, small temperature drift.
Detailed content
-
- Pressure Overload Capacity: 150% FS (static), 300% FS (dynamic); Burst Pressure: 500% FS.
- Sensor Core: Diffused silicon pressure sensor, high sensitivity and good linearity.
- Measuring Diaphragm: 316L stainless steel, corrosion resistance and good sealing performance.
- Process Connection: G1/2 external thread (BSP), flange connection (optional); Electrical Connection: M12 waterproof connector, cable outlet (optional).
- Power Supply: 12-36 VDC two-wire system, standard 24 VDC, power consumption ≤20 mA.
- Operating Temperature: -10°C to +80°C (ambient), -20°C to +150°C (medium); Storage Temperature: -40°C to +100°C.
- Protection Rating: IP67; Enclosure Material: Die-cast aluminum (powder coating), anti-corrosion.
- Vibration Resistance: 10-2000 Hz, 2 g acceleration; Shock Resistance: 50 g (11 ms), IEC 60068-2-27.
- Service Life: ≥5 years (nominal condition); Certification: CE, ATEX (explosion-proof, optional), IEC 61010.
- Functional Features:
- Diffused silicon pressure sensor core with 316L stainless steel measuring diaphragm has high measurement sensitivity, good linearity and excellent corrosion resistance, can work stably in various industrial medium environments (gas, liquid, steam), and the measuring diaphragm has good sealing performance, no medium leakage.
- ±0.1% FS high measurement accuracy and digital temperature compensation technology (-10°C to +80°C) ensure the accurate measurement of pressure parameters in different ambient temperature environments, the temperature drift is small (≤0.01% FS/°C), and the long-term stability is good (≤0.02% FS/year).
- 4-20 mA DC two-wire system standard output signal is perfectly matched with PLC, DCS, HMI and other industrial control systems, the two-wire system design integrates power supply and signal transmission, simplifying the on-site wiring structure and reducing the installation cost.
- Digital zero/span adjustment via HART protocol eliminates the need for mechanical adjustment, with high adjustment precision and convenient on-site calibration, and the HART protocol also supports remote parameter setting, monitoring and fault diagnosis, realizing the remote management of the transmitter.
- 150% FS static overload and 300% FS dynamic overload capacity, 500% FS burst pressure ensure the transmitter is not damaged under the condition of accidental overpressure in the industrial field, improving the reliability and safety of the equipment.
- IP67 high protection rating with M12 waterproof connector and die-cast aluminum anti-corrosion enclosure ensures the transmitter can work stably in harsh industrial field environments with dust, water mist and corrosion, and is suitable for outdoor and on-site installation.
- 12-36 VDC wide voltage two-wire system power supply adapts to different industrial power supply voltages, the standard 24 VDC power supply is consistent with the industrial control system power supply, and the low power consumption (≤20 mA) reduces the power load of the control system.
- G1/2 standard process connection is easy to install and connect with the industrial process pipeline, the precision machined thread ensures the sealing performance of the connection, and the optional flange connection adapts to the large-diameter pipeline and high-pressure medium measurement requirements.
- Strong vibration and shock resistance (2 g vibration, 50 g shock) ensures the transmitter can work stably in the industrial field environment with strong vibration (such as production lines, heavy machinery, pumps and compressors), without measurement error and damage caused by vibration and shock.
- Optional ATEX explosion-proof certification adapts to the pressure measurement requirements of flammable and explosive dangerous environments (such as petrochemical, chemical), and the CE and IEC 61010 certifications meet the international industrial electrical safety and electromagnetic compatibility standards.
- Application Scenarios: Widely used for the on-line pressure measurement of industrial process parameters in the fields of petrochemical, chemical, food and beverage, pharmaceutical, water treatment, metallurgy and power generation. It is the core sensing component for the pressure detection of gas, liquid and steam pipelines in oil refineries, chemical reactors, water treatment plants, food production lines, boiler systems and hydraulic systems, and is suitable for all industrial occasions that require high-precision, stable and reliable gauge pressure measurement of 0-10 bar industrial media.
