Digital guide
You are here:
AEG 15A0251-000 Main Control PCB
Part Number: 15A0251-000
Product Introduction:
The 15A0251-000 is the primary main control printed circuit board used in AEG built-in ovens. It serves as the central processing unit for all electrical operations including heating element control, fan motor management, and safety interlock monitoring.
Detailed content
Technical Specifications:
- Board Type: Main Power Control PCB
- Input Voltage: 220–240V AC, Single Phase, 50/60Hz
- Output Channels: 6–8 Relay/Triac Outputs
- Microcontroller: 8-Bit / 16-Bit MCU (AEG Proprietary Firmware)
- Memory: EEPROM for Program Storage
- Board Dimensions: Approximately 220 mm x 160 mm
- Weight: ~180 grams
Functions:
- Heating Element Power Regulation (Phase-Angle Control via Triacs)
- Fan Motor Speed Control (PWM Output)
- Door Interlock Safety Monitoring (Normally Closed Contact)
- Temperature Sensor Input Processing (NTC 10kΩ)
- Overtemperature Protection (Thermal Cut-Off Logic)
- Program Memory & Execution
Material Composition:
- PCB Substrate: FR-4 TG155
- Component Mounting: SMD + Through-Hole Hybrid
- Relay Type: Power Relay (16A / 250V AC)
- Triac Type: BTA16-600B or Equivalent (16A / 600V)
Applicable Models: AEG A1482AES, AEG A-Series Built-In Ovens
Installation Requirements:
- Must be mounted on insulated chassis bracket
- Secure with 4x M4 screws with spring washers
- All high-voltage connections must be crimped and insulated
