Technical Specifications:

• Part Number: 140CFA04000
• Compressor Type: Hermetic reciprocating, single cylinder
• Refrigerant: R600a (Isobutane) — 40g – 60g charge
• Rated Voltage: 220–240V AC, 50Hz
• Rated Input Power: 75W – 120W
• Displacement: 9.8 – 11.2 cm³/rev
• Operating Pressure: Suction 0.15 – 0.45 MPa / Discharge 1.2 – 2.0 MPa
• Rotation Speed: 2850 – 3450 RPM
• Lubricant: POE (Polyol Ester) oil — miscible with R600a
• Noise Level: ≤ 42 dB(A)
• Weight: 8.5 – 11.0 kg
• Insulation Class: Class F (155°C)

Materials:

• Shell: Welded steel (DC04 cold-rolled steel)
• Cylinder: Cast iron or aluminum alloy
• Valves: Spring steel (SUS302) with PEEK reed valve plates
• Crankshaft/Connecting Rod: Carbon steel, nitrided surface
• Motor Windings: Copper, Class F enamel insulation

Working Principle:
The compressor operates on the vapor-compression cycle: low-pressure refrigerant gas enters the suction port → piston compresses the gas → high-pressure gas exits through the discharge valve → gas flows to the condenser → after heat rejection, liquid refrigerant passes through the expansion valve → evaporator absorbs heat from the cabinet → low-pressure gas returns to compressor suction.

Advantages:

• Ultra-low noise — optimized crankshaft balance and rubber mounting
• R600a refrigerant — zero ODP, GWP = 3 (environmentally superior to R134a)
• High COP (Coefficient of Performance) — contributes to A+++ energy rating
• Long service life — hermetic seal prevents refrigerant leakage

Installation Requirements:

• Must be installed in a well-ventilated compartment (minimum 10L air space around compressor)
• Vibration isolators mandatory — use original rubber mounts
• Electrical connection via PTC starter + thermal overload protector
• Refrigerant circuit must be evacuated and charged by certified technician