Digital guide
You are here:
AEG 110-CPU-612-03 Series Compact PLC CPU Module
- Product Introduction: This is a compact PLC CPU module of AEG’s 110 series with the model 110-CPU-612-03, with 6k program steps and 24 VDC power supply, designed for small-scale industrial control systems and standalone equipment control. It integrates a built-in digital I/O, high-speed counter, and RS-232 communication port, adopting a compact structural design and high-performance industrial processor, with strong expandability and reliable operation, and is a core control component for small-scale automation control such as single-machine equipment, small production lines and municipal small facilities.
- Technical Specifications:
- Processor: 16-bit industrial low-power RISC processor, operating frequency 40 MHz, dedicated for PLC control logic processing.
- Program Memory: 6k user program steps (Flash memory, non-volatile), data memory 1k words (RAM, battery backup).
- Built-in I/O: 12 digital inputs (24 VDC NPN), 8 digital outputs (24 VDC PNP), 1 high-speed counter (10 kHz, up/down).
- Communication Interface: 1×RS-232 (Modbus RTU/AEG dedicated protocol), transmission rate 300-115200 bps, support HMI and programming terminal connection.
Detailed content
-
- Expansion Interface: 1×extension bus, support up to 4 expansion modules (digital I/O, analog I/O), maximum I/O points 128.
- Power Supply: 24 VDC ±15% input, power consumption ≤5 W, input current ≤250 mA, with overvoltage and reverse polarity protection.
- Programming Language: Ladder Diagram (LD), Function Block Diagram (FBD), in line with IEC 61131-3 standard, support online debugging.
- Working Temperature: -20°C to +60°C; Storage Temperature: -40°C to +85°C; Humidity: 5% to 95% (non-condensing).
- Dimensions: 90mm × 160mm × 50mm (W×H×D); Mounting: Standard 35mm DIN rail mounting, compact design.
- LED Indicators: Power (green), run (green), fault (red), I/O status (independent LED for built-in I/O).
- Functional Features:
- 6k program steps and 16-bit high-performance processor meet the control logic requirements of small-scale industrial control systems and standalone equipment, the fast processing speed ensures no logic delay, meeting the high real-time requirements of single-machine control.
- Integrated 12 digital inputs + 8 digital outputs reduce the need for additional I/O modules, realize the basic control function of the system with a single module, and save the installation space and configuration cost of the control cabinet.
- Built-in 10 kHz high-speed counter supports the speed and position detection of small mechanical equipment such as conveyors and rotary tables, realizing high-precision counting and speed control without additional high-speed counting modules.
- 1×RS-232 communication port supports Modbus RTU and AEG dedicated protocol, realizing the connection with HMI, handheld programming terminal and other equipment, and facilitating on-site programming, debugging and real-time monitoring of the system status.
- 1×extension bus supports up to 4 expansion modules, the maximum I/O points can be expanded to 128, and the flexible expansion design meets the subsequent capacity expansion requirements of small-scale control systems, with strong scalability.
- 24 VDC low-voltage power supply with overvoltage and reverse polarity protection is perfectly matched with the industrial 24 VDC power supply system, effectively protecting the CPU module from damage caused by power supply abnormalities, and improving the system’s reliability.
- Non-volatile Flash program memory ensures that the user program is not lost after power failure, and the battery-backed RAM data memory retains important process data and set parameters during power failure, without reconfiguration after power recovery.
- Compact DIN rail mounting design (90mm width) saves the installation space of the industrial control cabinet, suitable for the control cabinet with limited space in standalone equipment and small production lines, with strong site adaptability.
- IEC 61131-3 standard programming language (LD/FBD) is easy to learn and use, compatible with mainstream PLC programming habits, reducing the learning cost of engineers, and the online debugging function facilitates on-site fault troubleshooting and program modification.
- The module has a full set of self-diagnosis functions, which can real-time monitor the power supply, program operation and I/O status, and the fault LED indicator and fault code prompt facilitate quick location of system faults, improving the maintainability of the system.
- Application Scenarios: Widely used for the control of small-scale industrial automation systems and standalone equipment in industrial fields such as factory single-machine equipment, small packaging lines, building ventilation control, and municipal small water supply and drainage facilities. It is the core control component for standalone equipment control such as small conveyor belts, automatic packaging machines, water tank liquid level control, and workshop exhaust fan control, and is suitable for all industrial and civil occasions that require small-scale, compact and cost-effective PLC control systems.
