Digital guide
You are here:
AEG 100-265-816 Industrial Grade Solenoid Valve
- Product Introduction: This is a 2/2 way normally closed (NC) industrial grade solenoid valve of AEG, with 24 VDC solenoid coil, specially designed for the on-off control of gas, liquid and steam media in industrial fluid control systems. It adopts a stainless steel valve body, brass valve core and high-sealing rubber seal, with high pressure resistance, good sealing performance and long service life, and is a core fluid control component for realizing the on-off control of industrial fluid pipelines.
- Technical Specifications:
- Valve Type: 2/2 way normally closed (NC), direct-acting structure (no minimum pressure difference required).
- Nominal Diameter (DN): 8 mm; Connection Method: G1/4 external thread (BSP), quick connection (optional).
- Medium: Clean gas, water, oil, steam (≤180°C), non-corrosive liquid/gas, viscosity ≤20 cSt.
- Working Pressure: 0-16 bar (liquid/gas), 0-10 bar (steam); Pressure Drop: ≤0.5 bar (full flow).
- Flow Coefficient (Cv): 0.8; Response Time: ≤10 ms (open), ≤8 ms (close).
Detailed content
-
- Solenoid Coil: 24 VDC ±10%, power consumption 8 W, coil resistance 72 Ω (20°C), IP65 protection rating.
- Valve Body Material: 304 stainless steel; Valve Core Material: H62 brass; Seal Material: FKM (Viton) (high temperature and oil resistance).
- Operating Temperature: -10°C to +180°C (medium), -20°C to +80°C (coil); Storage Temperature: -40°C to +90°C.
- Protection Rating: IP65 (coil), IP67 (valve body, optional); Service Life: ≥10 million switching cycles (nominal condition).
- Mounting Method: Any direction (vertical installation recommended for steam medium); Weight: 0.25 kg.
- Functional Features:
- 2/2 way normally closed direct-acting structure has no minimum pressure difference requirement, can work stably under the condition of zero pressure and vacuum of the medium, and is suitable for the on-off control of low-pressure and vacuum fluid pipelines, with strong adaptability.
- 304 stainless steel valve body and H62 brass valve core have good corrosion resistance and pressure resistance, can work stably under the working pressure of 0-16 bar, and are suitable for various industrial fluid media (gas, water, oil, steam), with strong versatility.
- FKM (Viton) high-temperature oil-resistant seal material ensures the excellent sealing performance of the valve core and valve seat, no medium leakage under nominal pressure, and can work stably at the medium temperature of ≤180°C, adapting to high-temperature fluid control requirements (such as steam).
- ≤10 ms (open)/≤8 ms (close) ultra-fast response time realizes the real-time on-off control of the fluid pipeline, meeting the high real-time requirements of industrial fluid control systems (such as pneumatic control, hydraulic control, injection molding machine fluid control), and improving the control precision of the system.
- 24 VDC 8 W low-voltage low-power solenoid coil with IP65 dustproof splash-proof protection rating is perfectly matched with the PLC digital output and industrial 24 VDC power supply system, realizing direct driving by the control system without additional power supply, simplifying the circuit structure.
- G1/4 external thread standard connection method is easy to install and connect with the industrial fluid pipeline, the thread is precision machined, no medium leakage at the connection, and the optional quick connection method further improves the on-site installation efficiency.
- Any direction mounting design adapts to different installation space and pipeline layout requirements of the industrial field, and the vertical installation recommendation for steam medium can avoid the accumulation of condensate water in the valve body and improve the service life of the valve.
- ≥10 million switching cycles long service life under nominal conditions ensures the stable work of the solenoid valve in the long-term continuous operation of the industrial fluid control system, reducing the frequency of valve replacement and maintenance cost, and improving the operation efficiency of the equipment.
- The valve core is designed with a filter screen, which can filter the impurities in the medium and prevent the valve core from jamming caused by impurities, ensuring the reliable switching of the solenoid valve, and the filter screen is easy to disassemble and clean, with simple maintenance.
- The solenoid coil is designed with a quick disassembly bayonet structure, which can replace the coil without disassembling the valve body and pipeline, reducing the maintenance time and the downtime of the production line, and the coil is fully compatible with AEG standard solenoid valve coils (92 series).
- Application Scenarios: Widely used for the on-off control of industrial fluid pipelines in the fields of factory automation, pneumatic control, hydraulic control, food and beverage, pharmaceutical, chemical and water treatment. It is the core fluid control component for the on-off control of gas, water, oil and steam pipelines in pneumatic actuators, hydraulic systems, water treatment equipment, food production lines, chemical reactors and injection molding machines, and is suitable for all industrial occasions that require reliable on-off control of 2/2 way fluid pipelines with DN8 and working pressure 0-16 bar.
