Technical Specifications:

• Part Type: Door bellows seal with integrated detergent dispenser seal
• Material: EPDM rubber (Ethylene Propylene Diene Monomer)
• Hardness: 60±5 Shore A
• Temperature Resistance: -40°C to +140°C
• Color: Dark gray / anthracite
• Cross-Section Profile: Double-lip design with central bulb
• Overall Dimensions: Approximately 570mm (inner diameter) × 610mm (outer diameter) × 75mm (depth) — varies by appliance model
• Weight: 0.35 kg
• Magnetic Strip: Embedded ferromagnetic wire in inner lip for door latch retention

Material Composition:

• Primary Material: EPDM rubber compound (peroxide-cured)
• Reinforcement: Fabric mesh embedded in central bulb section
• Magnetic Strip: Stainless steel encased ferromagnetic wire, 2mm diameter
• Adhesive Backing: High-temperature silicone adhesive strip for mounting
• Anti-Mold Additive: Zinc pyrithione integrated into rubber compound

Structural Features:

• Outer Lip: Presses against door frame — primary water seal
• Inner Lip: Presses against drum opening — secondary containment seal
• Central Bulb: Flexible accordion section allows door opening/closing without seal distortion
• Detergent Cup Seal: Integrated small seal at 12 o’clock position for dispenser drawer alignment
• Mounting Channel: C-clip retention groove for snap-in installation (no adhesive required on most models)

Working Principle: The double-lip design creates two independent sealing barriers. When the door is closed and locked, the inner lip compresses against the stainless steel drum opening, and the outer lip compresses against the appliance door frame. The central bulb flexes to accommodate door swing angle (typically up to 165° opening). The embedded magnetic strip provides audible “click” feedback when door is fully closed and ensures positive latch engagement.

Advantages:

• EPDM material resists detergent chemicals, fabric softeners, and bleach
• Anti-mold additive prevents black mold growth in humid conditions
• Magnetic strip ensures reliable door lock engagement — safety critical
• Universal fit across multiple AEG front-loader models (verified by part number cross-reference)

Applicable Industries: AEG front-loading washing machines (L6, L7, L8 series), AEG washer-dryers (OKO, ÖKOMix series)

Installation Requirements:

• Remove old gasket completely — do not install over existing seal
• Clean mounting groove on door frame — remove all old adhesive residue
• Seat gasket into C-clip channel starting at 12 o’clock position, working clockwise
• Ensure detergent cup seal aligns with dispenser drawer opening
• Verify door closes with firm, even latch engagement — no gaps visible

Usage Precautions:

• Inspect gasket every 6 months — look for cracks, hardening, or mold
• Clean rubber surface with damp cloth and mild soap after every wash
• Never use petroleum-based cleaners on EPDM — causes swelling and degradation
• Replace immediately if any water leakage is detected during cycle
• Store spare gasket in cool, dark place — UV exposure accelerates EPDM aging