Technical Specifications

• Power Supply:
  • Operates on 24V DC with low power consumption, ensuring stable performance in industrial environments.
• Signal Handling:
  • Supports analog input signals including voltage (0–10 V, ±10 V) and current (4–20 mA, 0–20 mA) 312.
  • 16-bit resolution ensures high precision in signal conversion, with accuracy up to ±0.1% of full scale 312.
  • Isolated channels (1500V AC or 2500Vrms) protect against electromagnetic interference and ground loops 312.
• Physical Design:
  • Compact DIN rail-mountable form factor (324 x 22.5 x 225 mm) for space-efficient installation in control cabinets 112.
  • Lightweight construction (0.29 kg) facilitates easy handling and integration 112.
• Environmental Parameters:
  • Temperature Range: -20°C to +60°C ambient, suitable for harsh industrial conditions 47.
  • Humidity: 5–95% non-condensing, ensuring reliability in high-moisture environments 7.
  • Enclosure Rating: IP20 protection against solid particles, with optional ruggedized versions for dust/water resistance 7.
• Communication:
  • Protocols: Supports Modbus RTU and Profibus DP for seamless integration with PLCs, HMIs, and higher-level systems 34.
  • Redundancy: Optional dual-port Ethernet for fault-tolerant communication in critical applications 4.

Functional Features

1. Multi-Channel I/O Capability:
   • 32 independent analog input channels enable simultaneous monitoring of multiple sensors (e.g., pressure, temperature, flow) 13.
   • Signal Conditioning: Built-in filtering and scaling ensure accurate data acquisition, reducing noise and optimizing signal quality 38.
2. Diagnostic and Monitoring:
   • Real-Time Health Checks: Monitors signal integrity, power status, and temperature for predictive maintenance 38.
   • Error Reporting: Alerts operators via LED indicators or digital outputs in case of signal loss, module failure, or voltage irregularities 38.
3. Modular Architecture:
   • Scalable Configuration: Supports expansion via additional I/O modules for complex systems 38.
   • Hot-Swap Functionality: Allows replacement of faulty modules without system shutdown, minimizing downtime 38.
4. Safety Compliance:
   • Electrical Isolation: Protects against voltage spikes and ensures safe operation in high-risk environments 47.
   • EMC Immunity: Compliant with IEC 61000-6-2 standards for electromagnetic compatibility 4.

Application Scenarios

1. Industrial Automation:
   • Manufacturing: Controls conveyor belts, pumps, and mixers in food processing, pharmaceuticals, and automotive assembly lines.
   • Packaging: Optimizes filling and sealing processes with precise speed and pressure control.
2. Power Generation:
   • Combined Cycle Plants: Manages turbine speed, steam flow, and generator synchronization.
   • Renewable Energy: Converts variable-speed generator outputs in wind farms to grid-compatible power.
3. Oil and Gas:
   • Refineries: Monitors pressure, temperature, and flow in distillation columns and storage tanks.
   • Subsea Systems: Provides reliable control for subsea pumps and valves in offshore platforms.
4. Water and Wastewater:
   • Treatment Plants: Regulates chemical dosing, filtration, and sludge management processes.
   • Pumping Stations: Ensures efficient water distribution with remote monitoring and control.
5. HVAC Systems:
   • Building Automation: Controls heating, ventilation, and air conditioning (HVAC) systems for energy efficiency.

Integration and Compatibility

• System Integration:
  • Works with ABB’s Advant OCS controllers and System 800xA for centralized process management 214.
  • Compatible with third-party PLCs (e.g., Siemens S7, Rockwell ControlLogix) via standard protocols 48.
• Software Tools:
  • Configured using ABB’s Control Builder M for parameter setup, calibration, and firmware updates 48.
  • Supports ABB Ability™ Condition Monitoring for remote diagnostics and performance optimization 4.
• Safety Functions:
  • STO (Safe Torque Off) and SS1 (Safe Stop 1) for motor control applications 4.
  • Failsafe Design: Ensures predictable behavior during power loss or communication failure 4.

Environmental and Safety Considerations

• Sustainability:
  • RoHS-Compliant Materials: Reduces environmental impact through lead-free components (varies by region; consult ABB for specific compliance) 1617.
  • Energy Efficiency: Low-power design aligns with EU ErP Directive requirements 4.
• Rugged Reliability:
  • Resistant to vibration, shock, and voltage spikes common in industrial settings 37.
  • Optional conformal coating enhances durability in corrosive or high-humidity environments 7.

Discover our other products
Magnetek JF1H112N HC30CK230 MA34
Magnetek JF1H112N HC30CK230 230 V MN238
A.O.Smith JF1H112N HC30CK230 MK794
Magnetek JF1H112N HC30CK230 MF257
Magnetek JF1H112N HC30CK230 MF268